ICA-500 Users Manual

Warning: The download firmware procedure cannot be interrupted. If the power and/or network connection are broken during the download procedure, it might possibly cause serious damage to the ICA-500. Suggest that do not upgrade firmware via Wireless LAN due to high error rate possibly.

Please be aware that you should not turn off the power during updating the firmware and wait for finish message.

Once the upgrading process completed, the ICA-500 will reboot the system automatically. Note: please wait for 20 seconds, and then you can connect to ICA-500 again.

Factory Default: Recall the ICA-500 factory default setting

The “Factory Default” button will restore to the factory default configuration, all information changed and saved on the flash will be lost, and restored to the factory default setting.

Check the “Restore” box, then click “Reboot” button. You will be prompt before restore to factory default setting.

Select “OK” to continue, or “Cancel” to abort it.

44/80