Veo ICA-500 DC Power and Video Output Cable

ICA-500 User’s Manual

the ICA-500, the LED will be off and flash orange while some one accesses this ICA-500.

DC Power and Video Output Cable

The DC power input and video output cable is located on the ICA-500’s back panel. The input power is 12VDC. Note that supply the power to the ICA-500 with standard power adapter included in package. Otherwise, the improper power adapter may damage the unit and result in danger.

The ICA-500 also provides composite video output. User can use BNC video cable to connect the ICA-500 with a TV monitor or VCR.

8/80

Contents

Page Page Page Overview Minimum System Requirement Package Contents Physical Details Factory Microphone LAN Alarm I/O DC Power and Video Output Cable Hardware Installation Page Logging in to Homepage Before Operation Install the ICA-500with an ADSL Router First time using the ICA-500 Page Access the ICA-500from the Internet Explorer for the first time Page Logging in as an ordinary User Logging in as an Administrator Operating the ICA-500 Advanced Function Viewing Area Control Panel Control Panel Area Camera direction Up, Down Left, Right, Home Camera Speed Adjust camera focus Button Definition Note Advanced Function Area Basic Setting Camera Name: Default frame rate: Remote camera control: Log: Page Image Size: Image Quality: Image, Rotate, Mirror, Focus Mode, White Balance Mode: Saturation, Sharpness, Contrast, Hue: Camera Tour: Reset to Default: DHCP: IP address, Subnet mask, Default gateway, Primary DNS, Secondary DNS: HTTP Port 1: HTTP Port 2: Note: DDNS: PPPoE: Page Page Page Page &Function Notification Page Application Setting FTP server name: User name: Password: Remote path: Image file name: None: Date/Time: Sequence number: Mode: SMTP server name: Sender’s e-mailaddress: Receiver’s e-mailaddress: Subject: Page Page Synchronize the time with PC’s time: Change the time manually: Get Time from a NTP server: www.planet.com.tw .BIN Page Warning: Trigger Capture RightMouseButton of ActiveX Control View Menu “View” Page “Split” Page Page “Image Recording…->Save as JPEG” Page Page “Image Recording…->Save as AVI” Page Page Page “Save Current Picture As …” Page Appendix A: Restore Factory Default Settings Appendix B: Alarm I/O Connector Explanation of External I/O Circuit Diagram Example CAUTION Appendix C: Troubleshooting &Frequently Asked Questions Access ICA-500 Security Warning window WebWatch Class” [Refresh] Video Quality of ICA-500 Miscellaneous Network Appendix D: PING IP Address Appendix E: Bandwidth Estimation Appendix F: Time Zone Table Page Page Appendix G: DDNS Application (1) Environment of Fixed Valid IP Network (2) Environment of Dynamic IP Network 3. Application Steps—DDNS& Domain Name Page Page Page 4. Setup the DDNS and PPPoE