ICA-500 Users Manual

You may setup SMTP mail parameters for future event-message receiving such as motion detected or sensor activated.

SMTP server name:

Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.

User name:

Type the user name for the SMTP server.

Password:

Type the password for the SMTP server.

Sender’s e-mail address:

Type the sender’s E-mail address.

Receiver’s e-mail address:

Type the receiver’s e-mail address. This address is used for reply mail. Note: you can key in multiple receiver’s email address at the time.

Subject:

Type the subject/title of the E-mail up to 64 characters.

Mode:

Send a captured image via three different situations – via event such as motion detected or sensor activated or sends it periodically.

Select “SAVE” to save the setting.

Alarm 1: Setup Alarm Output 1 action via manual or event

You can issue an alarm output action by manual or event.

37/80