Veo ICA-500 Appendix D: PING IP Address

ICA-500 User’s Manual

Appendix D: PING IP Address

The PING (stands for Packet InterNet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm ICA-500 installed or if the IP address conflicts with any other devices over the network.

If you want to make sure the IP address of ICA-500, utilize the PING command as follows:

•Start a DOS window.

•Type ping x.x.x.x, where x.x.x.x is the IP address of the ICA-500.

The replies, as illustrated below, will provide an explanation to the problem.

If you want to detect any other devices conflicts with the IP address of ICA-500, also can utilize the PING command but you must disconnect the ICA-500 from the network first.

70/80

Contents

Page Page Page Overview Minimum System Requirement Package Contents Physical Details Factory Microphone LAN Alarm I/O DC Power and Video Output Cable Hardware Installation Page Logging in to Homepage Before Operation Install the ICA-500with an ADSL Router First time using the ICA-500 Page Access the ICA-500from the Internet Explorer for the first time Page Logging in as an ordinary User Logging in as an Administrator Operating the ICA-500 Advanced Function Viewing Area Control Panel Control Panel Area Camera direction Up, Down Left, Right, Home Camera Speed Adjust camera focus Button Definition Note Advanced Function Area Basic Setting Camera Name: Default frame rate: Remote camera control: Log: Page Image Size: Image Quality: Image, Rotate, Mirror, Focus Mode, White Balance Mode: Saturation, Sharpness, Contrast, Hue: Camera Tour: Reset to Default: DHCP: IP address, Subnet mask, Default gateway, Primary DNS, Secondary DNS: HTTP Port 1: HTTP Port 2: Note: DDNS: PPPoE: Page Page Page Page &Function Notification Page Application Setting FTP server name: User name: Password: Remote path: Image file name: None: Date/Time: Sequence number: Mode: SMTP server name: Sender’s e-mailaddress: Receiver’s e-mailaddress: Subject: Page Page Synchronize the time with PC’s time: Change the time manually: Get Time from a NTP server: www.planet.com.tw .BIN Page Warning: Trigger Capture RightMouseButton of ActiveX Control View Menu “View” Page “Split” Page Page “Image Recording…->Save as JPEG” Page Page “Image Recording…->Save as AVI” Page Page Page “Save Current Picture As …” Page Appendix A: Restore Factory Default Settings Appendix B: Alarm I/O Connector Explanation of External I/O Circuit Diagram Example CAUTION Appendix C: Troubleshooting &Frequently Asked Questions Access ICA-500 Security Warning window WebWatch Class” [Refresh] Video Quality of ICA-500 Miscellaneous Network Appendix D: PING IP Address Appendix E: Bandwidth Estimation Appendix F: Time Zone Table Page Page Appendix G: DDNS Application (1) Environment of Fixed Valid IP Network (2) Environment of Dynamic IP Network 3. Application Steps—DDNS& Domain Name Page Page Page 4. Setup the DDNS and PPPoE