Veo ICA-500 Application Setting, Application

ICA-500 User’s Manual

Application Setting

Application

Symbol	Item	Action
	FTP Client	Setup the ICA-500 as a client site and configure Server site in
		order to upload images to server
	FTP Server	Setup the ICA-500 as a server site and allow remote sites to
		check memory space availability
		(Not available yet in this software version)
	SMTP	Setup Mail configuration
	Alarm 1	Setup Alarm Output 1 action via manual or event
	Alarm 2	Setup Alarm Output 2 action via manual or event
	Image	Setup captured images storing naming configuration and
	Memory	provide any warning such as “Disk Full”
		(Not available yet in this software version)
	Alarm	Setup image saving actions in case of alarms activated
	Buffer	(Not available yet in this software version)
	Schedule	Setup scheduled recording activities
		(Not available yet in this software version)
	Motion	Setup motion detection area and sensor sensitivity
	Detection
	Time	Setup the ICA-500 time configuration
	Setting
	Popup	Setup event message while motion or sensors has been
		activated
	Firmware	Firmware upgrade
	Upgrade
	Factory	Recall the ICA-500 factory default setting
	Default

34/80