Verona VECTGMS304SS Product Dimensions and Cutout Requirements, Important Preparation Suggestions

Installation Manual

ENGLISH

Product Dimensions and Cutout Requirements

Important Preparation Suggestions

1.Chamfer all exposed edges of decorative laminate to prevent damage from chipping.

2.Radius corners of cutout and file to Insure smooth edges and prevent corner cracking. Recommend 1/4"or 3/8" diameter drill In each corner.

3.Rough edges, inside corners which have not been rounded and forced fits can contribute to cracking of the countertop laminate.

Figure 1. Product dimensions

CUT OUT	A	B	C	D
WIDTH
30”	MIN.28-1/2”	MIN 19”	2-1/2”	MIN 1-1/2”
	(72.4 cm)	(48.3 cm)	(6.35 cm)	(3.8 cm)
	MAX.29”	MAX 19-5/8”
	(73.6 cm)	(49.8m cm)
36”	MIN 34-1/2”	MIN 19”	2-1/2”	MIN 1-1/2”
	(87.6 cm)	(48.3 cm)	(6.35 cm)	(3.8 cm)
	MAX 35”	MAX 19-5/8”
	(88.9 cm)	(49.8m cm)

Figure 2. Coutout dimensions

5