3.4 Network Configuration

Ethernet Option

TCP/IP Option

Ethernet Option

MAC Address

This does not need configuration.

Link Speed

This function will show the current linking speed to be either 10Mbps or 100Mbps. However, the utility will auto-detect the current transmission speed on the network segment and set the transmission speed for the device accordingly.

Duplex Mode

The utility will detect the current transmission mode (half-duplex or full-duplex) on the network segment, and set the transmission mode for the device accordingly.

TCP/IP Option

IP address, Subnet Mask, Default Gateway

The IP address identifies your EDG device on the global network. Each EDG device has the same default IP address 10.0.0.1. Obtain a specific IP address from your network administrator and then configure each EDG device with an individual IP address, related Subnet Mask and Gateway Setting.

Note

EDG devices do not support auto IP address

 

configured by DHCP server.

EDG-4508+/4516+ User Manual

22

Page 34
Image 34
Vicks EDG-4508+, EDG-4516+ user manual Network Configuration, Ethernet Option MAC Address, Link Speed, Duplex Mode