Operation
ISF Presets ➤
ISF Presets
7ISF Night
ISF Day
| Custom 1 | Save |
| Custom 2 | Save |
Factory Default
| Information ➤ | |
| Information | |
Serial Num |
|
|
|
| |
Hardware | 0 | |
Firmware | 0100.0631 | |
Date |
| Apr 20 2007 |
|
|
|
Some television programs are produced based on the assumption that older television sets may not display the outer edges of the broadcast picture area. Overscan effectively trims away these inactive, outer edges and enlarges the remaining portion of the image to fill the display area.
Select from 1% to 10% of Overscan, as desired.
For HDTV, DVDs and other video sources, Overscan is generally not necessary or desirable.
For each input, the Vision 85 lets you save image quality settings as presets that you can recall at a later time. You can create up to four presets per input and resolution. Use the ISF Presets menu to recall saved image presets, or to save image settings in the “Custom 1” or “Custom 2” memory location. The
You should save changes to any of the following settings to a preset; otherwise they will be lost when a new input source or resolution is selected:
•Aspect ratio
•Picture quality settings (brightness, contrast, color saturation, tint and sharpness)
•Input position (image position, width, height and overscan percentage)
To reset the Custom 1 and Custom 2 image presets to their factory defaults, select Factory Default and press ENTER.
Select Information from the Main Menu to see information that uniquely identifies your projector: its serial number, the installed hardware and firmware versions and the firmware version build date. Should you ever need to contact Vidikron Technical Support, this information will help them answer your questions or resolve product performance issues.
56 | Vidikron Vision 85 Owner’s Operating Manual |
