Operation

Automatic Contrast: The Vision 85 can dynamically adjust the contrast (white level) according to the color content in the signal, to produce the best picture quality. Select Automatic Contrast from the Picture Adjust menu to activate this feature. Set it to Off, 1, 2, or 3 as desired. Selecting “3” results in a higher average white level than the other settings.

Reset to Defaults: To reset all picture quality settings for the current input to their factory-default values, select Reset to Defaults from the Picture menu.

The Vision 85 provides nine adjustable white balance parameters, allowing precise adjustment of the intensity of the red, blue and green color components in the dark areas (Offset), light areas (Gain) and “mid-tone” areas (Gamma).

You can adjust these parameters as needed and store them in any of six presets (memory locations). The selected white balance preset can, in turn, be associated with a “Picture Memory“ preset (refer to White Balance on page 66). The most logical way to do this is to associate a white balance preset with the picture memory preset of the same name; however, you can associate a white balance preset with any picture memory preset.

Mem. Select: To select and edit a white balance preset, select Mem. Select from the White Balance menu.

Red Gamma/Green Gamma/Blue Gamma: Refer to ISF Night - Display Color on page 57.

Red Gain/Green Gain/Blue Gain: Refer to ISF Night - Display Color on page 57.

Red Offset/Green Offset/Blue Offset: Refer to ISF Night - Display Color on page 57.

Default: To reset the Gamma, Gain and Offset settings for the currently-selected white balance preset to their factory-default values, select Default from the White Balance menu. Then, select Yes to confirm the reset.

White Balance

White Balance

Mem. Select

4

 

 

Gamma

 

Red Gamma

0

Green Gamma

0

Blue Gamma

0

Gain

 

Red Gain

0

Green Gain

0

Blue Gain

0

Offset

 

Red Offset

0

Green Offset

0

Blue Offset

0

Reset to Defaults

 

 

 

Select Information from the Main Menu, then select Signal Info from the Information menu to display the resolution, horizontal frequency and vertical frequency of the current input signal.

Information

Information

Frequency

Phase

H-Shift

V-Shift

Reset to Defaults

Special Modes

Signal Info

Auto Setup

Vidikron Vision 85 Owner’s Operating Manual

69

Page 81
Image 81
Vidikron 85 manual White Balance