Vidikron 85 - page 24

Controls and Functions

12 Vidikron Vision 85 Owner’s Operating Manual

PRELIMINARY

1. IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2. LIGHT

Press to illuminate the buttons.

3. ON / OFF

Press to turn the projector on or off.

4. ENT (Enter)

Press to select a highlighted menu item or confirm a changed setting.

5. Cursor Buttons ( , , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the

available aspect ratios, in this order:

UP Button = 16:9 - Standard (4:3) - Letterbox - IntelliWide - Cinema - IntelliWide 2.35

DOWN Button = IntelliWide 2.35 - Cinema - IntelliWide - Letterbox - Standard (4:3) - 16:9

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this

order:

LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 -

S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB

2 - HDMI 1 - HDMI 2

6. RETURN/EXIT

Press this button to exit the current menu and return to the previous one, or to cancel an

operation.

7. MENU

Press this button to access the OSD controls.

On some remote control units, this button is where the RETURN/EXIT

button (item #6) appears here.

IntelliWide 2.35 is available only on the Vision 85/CineWide and Vision

85/CineWide with AutoScope. For more information about aspect ratios,

refer to Table 4-1.

The “direct select” function of the UP, DOWN, LEFT and RIGHT buttons is

available only on the analog inputs (HD/RGB, SD Component, Composite

and S-Video).

On some remote control units, the ENT (Enter) button (item #4) is in this

location.

Note

Note

Note

Note

Contents

Main Page TWO YEAR LIMITED WARRANTY For Projectors, Video Processors and Controllers Page VIDIKRON PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS Safety Precautions Page Page Page Page Page Page 1.1 About This Manual 1.2 Using This Manual WARNING DANGER! 1.3 Description, Features and Benefits Page 2.1 Vision 85 at a Glance 2. Controls and Functions Page 2.2 Vision 85 Rear Panel 1 2 3 4 5 6 2.3 VHD Controller Front Panel 1 2 3 2.4 VHD Controller Rear Panel Page Controls and Functions Vidikron Vision 85 Owners Operating Manual 11 2.5 Vision 85 Remote Control Unit Figure 2-5. VHD Controller/Vision 85 Remote Control Page Page 2.6 Vision 85 Built-In Keypad 3.1 Remote Control Page 3.2 Quick Setup Installation should be performed by a qualified custom video installation specialist. Table 3-1. Installation Overview 3.3 Installation Considerations Table 3-1. Installation Overview (continued) Table 3-2. Projector Installation Options Table 3-3. Throw Ratios for the Vision 85 Series Ceiling Installation Floor Installation Page Page Page Page Page Page 3.5 Mounting the Vision 85 3.6 Connections to the Vision 85 and VHD Controller Page 30 Vidikron Vision 85 Owners Operating Manual Digital (DTV) RGB or Component Video Connections: See Figure 3-12. Red/Pr Green/Y Blue/Pb Horiz Vert Figure 3-12. Digital (DTV) RGB or Component Video Connections DTV or Progressive Component (YPbPr) Source Vidikron Vision 85 Owners Operating Manual 31 Analog (Computer) RGB Connections: See Figure 3-13. Red Green Blue Horiz Vert Personal Computer Figure 3-13. Analog RGB Connections 32 Vidikron Vision 85 Owners Operating Manual Composite/S-Video/Component Video Connections: See Figure 3-14. Pb Pr Y Figure 3-14. Composite, S-Video and Component Video Connections DVD Player, VCR, Satellite Receiver, Laser Disc etc. to Automation/ Control System or PC 34 Vidikron Vision 85 Owners Operating Manual Connecting 12-Volt Trigger Outputs to External Equipment AC Input AutoScope Lens Motor (Rear) INPUTS OUTPUTS VHD Controller Rear Panel Ring = +5V Tip = IR Input Sleeve = Ground (3.5-mm mini phono plug) IR Receiver Remote Control 3.7 Turning on the Power Current Source Format Component SD NTSC 480i 16:9 V85 Input Resolution 3.8 Adjusting the Picture Orientation Focus 3.9 Primary Lens Adjustments Zoom in Zoom out 3.10 Installing and Adjusting the CineWide Anamorphic Lens Page Page Page Page Page Page Page Wrong Position Correct Position Page Operation Input Source Calibration ISF Presets Input Position Picture 7 Table 4-1. Aspect Ratio Settings Table 4-1. Aspect Ratio Settings (continued) Page Page Page Page 7 Page Page Page Page Page Page Operation Vidikron Vision 85 Owners Operating Manual 63 4.3 On-Screen Menus for 1080i (Digital) or 1080p Signals Language Options Information White Balance Page Picture Adj. Table 4-2. Default Picture Memory Settings for Digital 1080i and 1080p Sources Page Page Table 4-3. Effects of Primary Color Hue Adjustments Page Page Page Page 5.1 Lamp Replacement 5.2 Troubleshooting Tips Table 5-1. Troubleshooting Chart Table 5-1. Troubleshooting Chart (continued) Page 6.1 RS-232 Connection and Port Configuration 6.2 Serial Command Syntax Table 6-1. Serial Commands Page Page Page Page Page 7.1 Vision 85 Specifications Table 7-1 lists the Vision 85 specifications. Table 7-1. Vision 85 Specifications Table 7-1. Vision 85 Specifications (continued) 7.2 VHD Controller Specifications Table 7-2 lists the VHD Controller specifications. Table 7-2. VHD Controller Specifications Specifications 86 Vidikron Vision 85 Owners Operating Manual 7.3 Vision 85 Dimensions Figure 7-1 shows the Vision 85/CineWide with AutoScope dimensions (all dimensions are in inches). Figure 7-1. Vision 85/CineWide with AutoScope Dimensions