Vidikron 90 manual Connections to the Vision, DVI Connections See Figure

Installation

3.4

Connections to the Vision 90

Connector Panel Access ➤

Connecting the Vision 90 to ➤

Source Components

Proceed as follows to connect the Vision 90 to your video sources, external controller(s) -- if present -- and AC power.

When connecting your equipment:

•Turn off all equipment before making any connections.

•Use the correct signal cables for each source.

•Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.

To access the connector panel, press the large, black door release button so it pops out. Then, turn the knob clockwise or counter-clockwise and pull gently on it to open the door.

Connect your video sources to the Vision 90 as shown and described in the sections that follow.

DVI Connections: See Figure 3-7.

Use the DVI inputs whenever possible. This ensures the highest video

Tip quality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the projector.

INPUTS

R	G
Pr	Y

RG

PrY

1 DVI

DVI 1

	INPUTS
B
Pb	H

BH

Pb

2 DVI

DVI 2

V
				TRIGGERS
	HD1			TRIGGERS
	HD1
			1	2	3	IR
	HD2		1	2	3	IR
	HD2
V					1 VIDEO-S
VIDEO COMPONENT					S-VIDEO 1	CONTROL
Pb	Pr	Y	VIDEO			232-RS
					2 VIDEO-S
					S-VIDEO 2
Pb	Pr	Y	VIDEO			RS-232
COMPONENT VIDEO						CONTROL

DVI Source (DVD Player or HD Tuner with HDMI or DVI out)

Figure 3-7. DVI Source Connections

3-10 Vidikron Vision Model 90 Owner’s Operating Manual