Vidikron 90 manual Lens Adjustments, Using the On-Screen Menus, Focus Zoom Shift

Operation

4.3

Lens Adjustments

Focus ➤

Zoom ➤

Shift ➤

4.4

Using the On-Screen Menus

To access the motorized lens controls, select Display Device from the Service Menu, then select Lens from the Display Device menu. The Lens menu gives you a great deal of control over the picture size, position and focus:

To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, press and hold the ENTER button.

To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign (-). Then, press and hold the ENTER button.

To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+). Then, press and hold the ENTER button.

To change the projected image position, use the cursor buttons to highlight “Left,” “Right,” “Up” or “Down.” Then, press and hold the ENTER button to shift the image in that direction.

Press the MENU button on either the remote control or the rear panel to display the Main Menu. To select a menu item, use the UP and DOWN buttons on either the remote control or the rear panel to highlight it. Press ENTER to confirm your selection.

The Vision 90 OSD menus are arranged hierarchically, as shown in Figure 4-1.

4-2 Vidikron Vision Model 90 Owner’s Operating Manual