Vidikron VL-37 manual Off

Serial Communications

Table 6-1. Serial Commands (continued)

Command

Description

The following serial commands are meant to emulate buttons on the remote control. Each button has its own serial command. Effectively, it is as if you were using the IR remote, except that you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote.

Each command begins with [key followed by the four-digit number of the button. No carriage return is necessary. The response you receive from the unit if the command is valid will be a right-bracket (]) followed by the four-digit numeric code you sent. (For example, the ‘ON’ command is [key0015; the response will be ]0015). All commands are in ASCII.

[	+	key	+	0002	OFF
				0015	ON
[	+	key	+	0004	Number 1
				0005	Number 2
				0006	Number 3
				0008	Number 4
				0009	Number 5
				0010	Number 6
				0012	Number 7
				0013	Number 8
				0014	Number 9
				0017	Number 0
				0035	Number 100
[	+	key	+	0023	TIMER OFF
[	+	key	+	0105	INPUT1
				0027	INPUT2
				0028	INPUT3
				0001	INPUT4
				0102	DVI
				0101	RGB HD
[	+	key	+	0003	CUSTOM
				0062	ISF NIGHT
				0031	ISF DAY
[	+	key	+	0040	ANAMORPHIC
				0043	4X3
				0039	LETTERBOX
				0126	INTELLIWIDE

Vidikron VL-37 Owner’s Operating Manual 49