Vidikron VL-37 manual Main Menu, Source, Aspect Ratio, Input1 Input2 Input3 Input4

Operation

Main Menu ➤

Vidikron VL-37

Source

Aspect Ratio

Picture Adjust

Audio

Timer

Setup

ISF Calibration

The Main Menu is the starting point for accessing all DView functions.

(The ISF Calibration menu is not accessible until you enter a passcode.)

Source ➤

■Input1

Input2

Input3

Input4

DVI RGB

From the Main Menu, select Source to choose a video signal source.

The active source is indicated by a green square (■) to its left; in the example at left, TV is the active source.

Aspect Ratio ➤

■Anamorphic Standard Letterbox IntelliWide

To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program material being viewed; refer to Table 4-1.

The currently-selected aspect ratio is indicated by a green square (■) to its left; in the example at left, Anamorphic is selected.

When you change the aspect ratio, save the change to a preset

Note afterwards. Otherwise, the change will be lost when a different input is selected. (The aspect ratio is saved for each input and resolution separately.) For information about saving settings, refer to Save Settings (not available for RGB input) on page 33.

26 Vidikron VL-37 Owner’s Operating Manual