Vidikron VL-37 manual 4Operation, Turning on the Power

1.Turn on your source components.

2.Plug the female end of the power cord into the AC receptacle on the rear of the DView (AC 100V ~ 240V).

3.Connect the other end to your AC power source. The power indicator lights red to indicate that the DView is in “standby” mode.

4Operation

4.1

Turning on the Power

4.Press the ON button on the remote control to turn on the display (or press the power button on the front of the display). The power indicator flashes for a few seconds, then lights solid green.

5.After a brief warm-up period (approximately 10 seconds), the DView will display an image.

OFFON

1	2	3
4	5	6
7	8	9
100	0	TIMER
		OFF

The DView OSD language is initially set to English, but can also display the menus in French, Spanish, Portuguese or German. To change the OSD language:

1.Press MENU.

2.Select Setup from the Main Menu.

3.Select OSD Language from the Setup Menu.

4.Press or to highlight the desired language and press ENTER. The change takes effect immediately.

To maximize image quality when using the DView with a personal computer, you may need to adjust the display properties of your PC video card. To do this:

1.Choose Settings from the Windows Start menu and click on “Control Panel.”

4.2

Changing the OSD Language

4.3

Setting the PC Display Properties

Vidikron VL-37 Owner’s Operating Manual 23