ViewSonic VS11915, CD4620 warranty Advanced Option, Gamma Selection, IR Control

ADVANCED OPTION

INPUT RESOLUTION * : INPUT RGB3,4 only

ySelects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768.

yAUTO: Determines the resolution automatically.

y1024x768: Determines the resolution as 1024x768

y1280x768: Determines the resolution as 1280x768

y1360x768: Determines the resolution as 1360x768

yThe setting you select becomes effective when POWER is turned OFF and ON again.

BLACK LEVEL EXPANSION * : INPUT RGB1,2(HDMI INPUT MODE-HD), VIDEO<S>, VIDEO only

ySelects a level of black expansion from “OFF”, “MIDDLE” and “HIGH.”

yIn case of go under the black cut-off level, please adjust the “Black level” in moderation on OSD menu.

GAMMA SELECTION

ySelects a display gamma.

y2.2

y2.4

yS gamma

yNative

yNOTE: sRGB picture mode is standard and cannot be changed.

SCAN MODE * : INPUT DVD/HD, VIDEO<S>, VIDEO only

yChanges the display area of the image.

yOVERSCAN: Set to display area about 95%

yUNDERSCAN: Set to display area about 100%

SCAN CONVERSION * : INPUT DVD/HD, VIDEO<S>, VIDEO only

ySelects IP (Interlace to Progressive) converter function.

yPROGRESSIVE: Enable the IP function, to convert interlace signal to progressive. Normally use this setting.

yINTERLACE*: Disable the IP function.

y*NOTE: This mode is better suited for motion pictures, but it increases chance of image retention.

FILM MODE * : INPUT DVD/HD, VIDEO<S>, VIDEO only

ySelects Film mode function.

yAUTO: Enable the Film mode function. This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video. We recommend to select “PROGRESSIVE” in “SCAN CONVERSION”.

yOFF: Disable the Film mode function. This mode is better suited for Broadcasting or VCR source.

IR CONTROL

ySelects the operation mode of the wireless remote controller when multiple CD4620 monitors are connected via RS-232C.

yThe item in this menu will become effective by pressing “SET” button on the selected item.

yNORMAL: The monitor will be controlled normally by wireless remote controller.

yPRIMARY: The first CD4620 monitor of those multi-connected via RS-232C is designated as PRIMARY.

ySECONDARY: CD4620 monitors other than the first one multi-connected via RS-232C are designated as SECONDARY.

yLOCK: Disable the monitor control by infrared wireless remote controller.

yKeep pressing “DISPLAY” button during 5 sec or more, this setting will return to “NORMAL”.

ViewSonic CD4620 30

Downloaded From TV-Manual.com Manuals