ViewSonic CD4620, VS11915 warranty Remote Control Pass-through mode, Key Code HEX

CR 00D 4

RCU-Code1

1

2

Length

3

1

RCU-Code2

F

3

RCU-Code2

1

3

RCU-Code1

0

2

Length

3

1

CR 00D 4

6.3Remote Control Pass-through mode

When PC sets the LCD monitor to Remote Control Pass through mode, the LCD shall send a three bytes packet (followed by “CR”) in response to RCU button activation. Note, that in this mode the RCU shall have no effect on the monitor function. For example: “+Volume” will not change the volume in the LCD but only sends “+Volume” code to PC over the RS232 port.

Remote Control pass-through packet format from LCD monitor to PC(ASCII)

Name	Length	RCU-Code1	RCU-Code2		CR
Byte Count	3	MSB	LSB
					00D
Bytes order	1	2	3	4

Example: Remote Control pass-through when “Menu” key is pressed (1A)

Name	Length	RCU-Code1	RCU-Code2		CR
Byte Count	3	1	A		00D
Bytes order	1	2	3	4

Example: Remote Control pass-through when key “1” is pressed (01)

Name

Byte Count

Bytes order

Example: Remote Control pass-through when “OK” key is pressed (1F)

Name

Byte Count

Bytes order

Key	Code (HEX)
Size	0F
Volume Up (+)	10
Volume Down (-)	11
Mute	12
POWER	15
INPUT	16
PIP ON/OFF	17
MENU	1A
Up	1B
Down	1C
Left(-)	1D
Right(+)	1E
SET	1F
PIP INPUT	00
PIP CHANGE	00
PICTURE MODE	00
AUDIO INPUT	00
SCREEN SAVER GAMMA	00
SCREEN SAVER BRIGHTNESS	00
DISPLAY	00
AUTO SETUP	00
EXIT	00

ViewSonic CD4620 55

Downloaded From TV-Manual.com Manuals