TILING
yTILING demonstrates multiple screens. This feature provides a single large screen using up to 25 monitors.
yIt will be able to divide up to 5 each H and V.
yThis requires you to feed the PC output into each of the monitors through a distributor.
yH MONITORS: Select number of horizontal divide.
yV MONITORS: Select number of vertical divide.
yPOSITION: Select a position to expand the screen.
yFRAME COMP: Works in tandem with TILING to compensate for the width of the tile bezels in order to accurately display the image.
yENABLE: Select “YES”, the monitor will expand the selected position.
yPIP and STILL will be disabled when “TILING” is activated.
POWER ON DELAY
yAdjusts the delay time from “standby” to “power on” mode.
y“POWER ON DELAY” time is selectable from OFF, 2sec, 4sec, 6sec, 8sec, 10sec, 20sec, 30sec, 40sec and 50sec.
DATE AND TIME
yAdjusts the current date and time for internal clock.
yYou should set this function when you use “SCHEDULE”.
SCHEDULE
yPrograms the monitor's working schedule.
ySchedule the power on and power off with hour and a day of the week. Also sets the input port.
yThis OSD can't remove except EXIT. (see “NOTE 2” on page 30 for further information)
MONITOR ID
yID numbers for remote control are assigned to CD4620 monitors that are
yID numbers 1 to 26 are selectable.
DDC/CI
yUse to turn ON or OFF the DDC/CI communication function. Select ON for normal use.
SYNC TYPE
ySelect “0.3V” for 0.3 Composite Sync.
ySelect “TTL” for TTL Sync.
ADVANCED OPTION RESET
ySelecting ADVANCED OPTION reset allows you to reset all OSD settings from ADVANCED OPTION settings, except for DATE & TIME.
ySelect “YES” and press “SET” button to restore the factory preset data.
yPress “EXIT” button to cancel and then return the previous menu.
NOTE 1: IMAGE PERSISTENCE
yPlease be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.
yTo alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
yAs with all personal display devices, ViewSonic recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Please set “POWER SAVE”, “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE” functions to further reduce the risk of Image persistence.
ViewSonic CD4620 | 31 |
Downloaded From
