To avoid monitor from falling | ViewSonic VS11915, CD4620 specification

4. To avoid monitor from falling

Take measures to prevent the monitor from falling over in case of an earthquake or other disaster to lessen the probability of injury and damage resulting from fall.

As shown in the figure, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor. (CD4620: approx. 34.6 kg) When you use screw hooks (commercially available), ring screw hooks, not C-shaped screw hooks (with opening), are recommended.

Screw hook, etc.

Commercially available

Screw Holes

Rope, etc.

Commercially available

ClamperScrew

Caution:

* Clamper and Screw is not supply.

yThe effectiveness of preventing from falling substantially depends on the strength of brackets and base to which prevention device from falling is attached. When you cannot ensure sufficient strength, provide adequate reinforcement.

yThough the recommended prevention from falling is intended to lessen the probability of injury and damage, it doesn’t assure its effectiveness against any kind of earthquake or disaster.

yDo not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.

yBefore moving the monitor, remove the rope that is securing the monitor. Failure to do so may result in injury or breakdown of the monitor.

ViewSonic CD4620

14

Downloaded From TV-Manual.com Manuals

Image 17

ViewSonic VS11915, CD4620 warranty To avoid monitor from falling, Clamper and Screw is not supply

Contents

ViewSonic Contents Page For U.S.A For Canada Compliance InformationCE Conformity for European Countries Following information is only for EU-member states Important Safety Instructions Declaration of RoHS Compliance Product disposal at end of product life Copyright InformationProduct Registration For Your Records Ergonomics Safety PrecautionsRecommended Use Package Contents ViewSonic CD4620 Page Wireless Remote Control Handling the remote control Operating Range for the Remote Control Setup Procedure Adjust the screen Adjust the soundAdjust the image Recommended Adjustment Ventilation Requirements for enclosure mounting How to Mount and Attach Options to the LCD MonitorUpright position Lay the screen face down Clamper and Screw is not supply To avoid monitor from falling Before making connections Wiring DiagramConnections Connect the LCD Monitor to a Personal Computer Connecting a Personal Computer Connect the LCD Monitor to a Computer with a Digital Output Connecting with Digital Interface Equipment Connect the LCD Monitor to a DVD Player Connecting a DVD Player with component out Connect the LCD Monitor to a Stereo Amplifier Connecting to a Stereo Amplifier Pressing the Main Power Switch Power on and OFF ModesPressing the power button Using the remote control Using Power Management Power IndicatorSelecting a video source To view a video source Picture Size Audio Source Switching Picture ModeControl Lock Mode Information OSD Screen Remote Control Control PanelOSD On-Screen-Display Controls Picture Position Screen Audio Audio ResetBalance Treble PIP Picture in Picture PIP ResetPIP Size PIP Audio Power Save ConfigurationConfiguration Reset Factory Reset OSD Turn OFF OFF TimerInformation OSD OSD H Position IR Control Advanced OptionGamma Selection Advanced Option Reset Power on DelayTiling Date and Time Recommendations For long life use of Public DisplayImage Sticking of LCD Panel Secondary Remote control numbering function Connection Controlling the LCD monitor via RS-232C Remote Control Stand is not supply. Stand sold as an option accessory How to install standsHow to remove the stands Features Troubleshooting 25.0 -165.0 MHz SpecificationsAnalog Input Digital Input = FAX Customer Support Viewsonic LCD Display Limited Warranty Exclusion of damages Viewsonic Display Products Mexico Limited Warranty Merida Protocol 1 with ID Introduction DescriptionProtocol 2 without ID Version control Date Reversion Changes and additions Communication Setting Hardware specificationCommand Message Reference Protocol 1, with ID Command Command TypeSet-Function format Send Command Type=s Reply Command Type=+ or No Reply CD4620/CD4220 set-function table Reply Hex Format Pass through RCU Enabled RCU Reply Command Type=r or Get-Function format Send Command Type=gGet-Function description ReplyHex Format PC Get-function command to CD4620/CD4220 LCD Monitor Length Command Value1 Value2 Value3 00D Length Command Value1 Value2 Value3CD4620/CD4220 set command table Set-Function description Pass through RCU has no Length Value1 Value2 Value3 Value4 00D Byte Count 00D Bytes order Ascii Key Code HEX Remote Control Pass-through mode