Upright position Lay the screen face down | ViewSonic CD4620

How to Mount and Attach Options to the LCD Monitor

You can attach mounting accessories to the LCD monitor in one of the following two ways:

1.In the upright position

2.Lay the screen face down

Protective Sheet

Table

Handles

Tabletop Stand

Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.

This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

Failure to follow these recommendations could result in voiding your warranty.

Use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them securely. (Recommended torque: 470 - 635N•cm). ViewSonic recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.

Caution:

For preventing the monitor from falling.

yInstall the monitor with metal brackets for wall or ceiling installation (commercially available) on your own responsibility. For detailed procedures of installation, refer to the instructions of the metal brackets.

yTo lessen the probability of injury and damage resulting from fall of the monitor in case of earthquake or other disaster, be sure to consult the bracket manufacturer for installation location.

yTo lessen the risk of falling of the monitor, thread commercially available rope (having a load capacity at least 1960N (200kgf)) through the handles at the right and left of the monitor and secure the rope to the wall mount brackets or ceiling mount brackets.

yDo not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.

3. Ventilation Requirements for enclosure mounting

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

ViewSonic CD4620

13

Downloaded From TV-Manual.com Manuals

Image 16

ViewSonic CD4620, VS11915 How to Mount and Attach Options to the LCD Monitor, Upright position Lay the screen face down

Contents

ViewSonic Contents Page Compliance Information For U.S.A For CanadaCE Conformity for European Countries Following information is only for EU-member states Important Safety Instructions Declaration of RoHS Compliance Product Registration For Your Records Copyright InformationProduct disposal at end of product life Recommended Use Safety PrecautionsErgonomics Package Contents ViewSonic CD4620 Page Wireless Remote Control Operating Range for the Remote Control Handling the remote control Setup Procedure Adjust the sound Adjust the screenAdjust the image Recommended Adjustment Upright position Lay the screen face down How to Mount and Attach Options to the LCD MonitorVentilation Requirements for enclosure mounting To avoid monitor from falling Clamper and Screw is not supply Connections Wiring DiagramBefore making connections Connecting a Personal Computer Connect the LCD Monitor to a Personal Computer Connecting with Digital Interface Equipment Connect the LCD Monitor to a Computer with a Digital Output Connecting a DVD Player with component out Connect the LCD Monitor to a DVD Player Connecting to a Stereo Amplifier Connect the LCD Monitor to a Stereo Amplifier Power on and OFF Modes Pressing the Main Power SwitchPressing the power button Using the remote control Power Indicator Using Power ManagementSelecting a video source To view a video source Picture Size Picture Mode Audio Source SwitchingControl Lock Mode Information OSD OSD On-Screen-Display Controls Remote Control Control PanelScreen Picture Screen Position Audio Reset AudioBalance Treble PIP Reset PIP Picture in PicturePIP Size PIP Audio Configuration Power SaveConfiguration Reset Factory Reset OFF Timer OSD Turn OFFInformation OSD OSD H Position Gamma Selection Advanced OptionIR Control Power on Delay Advanced Option ResetTiling Date and Time Image Sticking of LCD Panel For long life use of Public DisplayRecommendations Remote control numbering function Secondary Controlling the LCD monitor via RS-232C Remote Control Connection How to remove the stands How to install standsStand is not supply. Stand sold as an option accessory Features Troubleshooting Analog Input Digital Input Specifications25.0 -165.0 MHz Customer Support = FAX Limited Warranty Viewsonic LCD Display Exclusion of damages Mexico Limited Warranty Viewsonic Display Products Merida Introduction Description Protocol 1 with IDProtocol 2 without ID Version control Date Reversion Changes and additions Hardware specification Communication SettingCommand Message Reference Protocol 1, with ID Command Type CommandSet-Function format Send Command Type=s Reply Command Type=+ or Reply Hex Format No Reply CD4620/CD4220 set-function table Enabled RCU Pass through RCU Get-Function format Send Command Type=g Reply Command Type=r orGet-Function description ReplyHex Format PC Get-function command to CD4620/CD4220 LCD Monitor Length Command Value1 Value2 Value3 Length Command Value1 Value2 Value3 00DCD4620/CD4220 set command table Set-Function description Pass through RCU has no Byte Count 00D Bytes order Length Value1 Value2 Value3 Value4 00D Ascii Remote Control Pass-through mode Key Code HEX