CONFIGURATION 1
AUTO SETUP * : INPUT RGB3,4 only
yPress "SET" button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level.
yPress "EXIT" button to cancel execution AUTO SETUP and then will return to the previous menu.
AUTO ADJUST * : INPUT RGB3,4 only
ySelecting the auto adjust ON/OFF.
ySelecting ON when changing the timing, the horizontal position, vertical position and
POWER SAVE
ySelecting RGB "ON", the monitor will go to power management mode when RGB1,2,3,4 sync is lost.
ySelecting VIDEO "ON", the monitor will go to power management mode after about 10 minutes delay from when DVD/HD and VIDEO input signal is lost.
LANGUAGE
yOSD control menus are available in eight languages. (English, German, Spanish, French, Chinese and Russian)
SCREEN SAVER *Select "SCREEN SAVER" functions to reduce the risk of the "image persistence".
yBRIGHTNESS: The brightness is decreased when selected "ON".
yMOTION: Image is slightly expanded and moves 4 directions (UP, DOWN, RIGHT, LEFT) periodically (Need setting the time for movement).
yMovement area is approximately +/- 10mm from original position;
yPlease locate the important information such as text within 90% area of screen image.
ySee note (1) for this functions.
yPIP and STILL will be disabled when "MOTION" is active.
COLOR SYSTEM * : INPUT VIDEO<S>, VIDEO only
ySelecting the Color System depends on your input video format.
yAUTO: NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is automatically selected.
yNTSC: Specific selection of NTSC.
yPAL: Specific selection of PAL.
ySECAM: Specific selection of SECAM.
y
y4.43NTSC: Specific selection of 4.43 NTSC.
CONFIGURATION RESET
ySelecting the CONFIGURATION RESET allows you to reset all configuration settings.
ySelect "Yes" and press "SET" button to restore the factory preset data.
yPress "EXIT" button to cancel and return the previous menu.
FACTORY RESET
ySelecting "YES" allows you to reset PICTURE, SCREEN, AUDIO, CONFIGURATION1,2 and ADVANCED OPTION will be back to factory settings (except LANGUAGE, DATE & TIME and SCHEDULE).
ySelect "YES" and press "SET" button to restore the factory preset data. Press "EXIT" button to cancel and return the previous menu.
ViewSonic CD4620 | 28 |
Downloaded From
