ViewSonic PJ1172 manual PICTURE-2 Menu

PICTURE-2 Menu

With the PICTURE-2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instruct ions in the table below.

memo This menu cannot be selected at a M1-D signal.

Item	Description
V POSITION	Adjust the vertical position using the S/T buttons.:
	Up  Down
	memo This item can be selected only at a RGB signal.
H POSITION	Adjust the horizontal position using the S/T buttons.:
	Left  Right
	memo This item can be selected only at a RGB signal.
H PHASE	Adjust the horizontal phase to eliminate flicker using the S/T
	buttons.:
	Right  Left
	memo This item can be selected only at a RGB signal or a component
	video signal other than a COMPONENT port input of 525i/625i/
	SCART RGB.
H SIZE	Adjust the horizontal size using the S/T buttons.:
	Large  Small
	memo This item can be selected only at a RGB signal.
	memo When this adjustment is excessive, the picture may not be
	displayed correctly. In such a case, please reset the adjustment
	pressing the RESET button during this operation.
OVER SCAN	Adjust the over-scan ratio using the S/T buttons.:
	Large  Small
	memo This item can be selected only at a video signal.
	memo When this adjustment is too large, certain degradation may
	appear at the frame area of the picture. In such a case, please adjust
	small.
RESET	Select EXECUTE using the S button to reset PICTURE-2 menu
	items.:
	EXECUTE  CANCEL
	The items of the PICTURE-2 menu are collectively returned to the
	initial setting. Note that the item “H PHASE” is not reset.

ViewSonic PJ1172 24