ViewSonic PJ1172 manual Input Menu

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

Item	Description
COLOR SPACE	Select a color space mode using the S/T buttons.:
	AUTO  RGB  SMPTE240  REC709  REC601
	Selecting AUTO automatically selects the optimum mode.
	memo This item can be selected only at a RGB signal or a component
	video signal other than a COMPONENT port input of 525i/625i/
	SCART RGB.
	memo The AUTO operation may not work well at some signals. In such a
	case, select the SMPTE240 or the REC709 for a HDTV signal.
COMPONENT	Select a function of COMPONENT port using the S/T buttons.:
	COMPONENT  SCART RGB
	When SCART RGB is selected, the COMPONENT port functions as a
	port for SCART RGB signal input. Please refer to the section
	“Connecting Your Devices”.
VIDEO	Select a signal type mode using the S/T buttons.:
	AUTO  NTSC  PAL  SECAM  NTSC4.43  M-PAL  N-PAL
	Selecting AUTO automatically selects the optimum mode.
	memo This item is performs only at a video signal from the VIDEO port
	or the S-VIDEO port. For a component video signal, the signal type is
	identified automatically independently of this function.
	memo The AUTO operation may not work well at some signals. If the
	picture becomes unstable (ex. a irregular picture, a color lack), please
	select the mode depending on the input signal.
3D-YCS	Select TURN ON or TURN OFF using the S/T buttons.:
	TURN ON  TURN OFF
	When TURN ON is selected, the 3D-YCS mode works for a
	completely still image, or images with little motion.
	memo This item performs only at a NTSC3.58 video signal.
	memo When this function performs, the setting of the item “VIDEO NR”
	of this INPUT menu is not effective.
VIDEO NR	Select a noise reduction level using the S/T buttons.:
	HIGH  MIDDLE  LOW
	The noise on screen is reduced according to the selected level.
	memo This item performs only at a video signal from the VIDEO port or
	the S-VIDEO port. At a video signal of NTSC3.58, this function
	performs only when TURN OFF is selected to the item “3D-YSC” of
	this INPUT menu.
	memo When this adjustment is excessive, certain degradation may
	appear on the picture.
	(This table is continued to the following page.)

ViewSonic PJ1172 25