AUTO Menu

With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

Item

Description

 

 

ADJUST

Pressing the X (or the ENTER) button performs the automatic

 

adjustment.

 

At a RGB signal

 

The vertical position (V POSITION), the horizontal position (H

 

POSITION), the clock phase (H PHASE) and the horizontal size (H

 

SIZE) will be automatically adjusted.

 

memo Make sure that the application window is set to its maximum size

 

prior to attempting to use this feature. Dark pictures may still be

 

incorrectly adjusted. Use a bright screen when adjusting.

 

At a video signal

 

The signal type mode best suited for the respective input signal will

 

be selected automatically.

 

memo This function is available only when AUTO is selected to the item

 

“VIDEO” of the INPUT menu. For a component video signal, the signal

 

type is identified automatically independently of this function.

 

memo This operation requires approximately 10 seconds, and the

 

message “AUTO IN PROGRESS” is displayed during the operation.

 

memo This operation may not work well at some signals. If the picture

 

becomes unstable (ex. a irregular picture, a color lack), please select

 

the suitable mode to the item “VIDEO” of the INPUT menu.

 

 

POWER OFF

Set the time using the S/T buttons.:

 

Long (max. 99 minutes) Short (min. 0 minute = DISABLE)

 

ex.

 

When the time is set to 1 to 99, the projector lamp will go off and the

 

STANDBY/ON indicator begins blinking when the passed time with a

 

proper signal (without no-signal and an unsuitable signal) reaches at

 

the set time. Please refer to the section “Turning Off The Power”.

 

 

POWER ON

Select TURN ON or TURN OFF using the S/T buttons.:

 

TURN ON TURN OFF

 

When TURN ON is selected, you can turn the projector on without

 

pressing the STANDBY/ON button. Please refer to the section

 

“Turning Off The Power”.

 

 

 

(This table is continued to the following page.)

ViewSonic PJ1172

27

Page 32
Image 32
ViewSonic PJ1172 manual Auto Menu, Adjust, Power OFF, Power on