For Windows 2000 and XP:
1Click the Start button and select Run.
2Type cmd in the field provided, and press the OK key.
3At the command prompt, run ipconfig /all, and look at your wireless router’s physical address.
4Write down your wireless router’s MAC address.
To clone your network wireless router’s MAC address onto the wireless router and avoid calling your ISP to change the registered MAC address, follow these instructions.
1Select Enable.
2Enter your wireless router's MAC address in the MAC Address field.
3Click the Apply button.
To disable MAC address cloning, keep the default setting, Disable.
Remote Management: This feature allows you to manage your wireless router from a remote location.
Internet. To disable this feature, keep the default setting, Disable. To enable this feature, select Enable, and use the specified port (default is 8080) on your PC to remotely manage the wireless router. Also, change the wireless router’s default password to one
ViewSonic Wireless Router | 30 |
