REMOTE CONTROL
Point the front of the remote control directly at the front of the appliance, making sure there are no objects between the remote control and the appliance.
The distance between the remote control and the appliance should not be more than 7 m, as the reliability of the remote control is affected beyond this range.
Make sure that you do not point the remote control at an angle to the appliance, as beyond an angle of ±30° to the centre axis the appliance may not respond as well to the remote control. Change both batteries if the distance at which the remote control can be used effectively decreases.
BATTERIES
Using batteries
Handling batteries incorrectly can cause battery acid to escape or an explosion in extreme cases. The batteries must be correctly inserted taking note of the polarity, which is marked in the inside of the battery compartment.
In order to make full use of the batteries’ life, do not mix new and used batteries. Make sure that you insert batteries of the same type.
Some batteries are rechargeable, others are not however. Take note of the precautions and instruc- tions that are included on all batteries.
Remove the batteries if the remote control is not going to be used for a long time.
Under no circumstances must batteries be
For environmental reasons, used batteries should be disposed of in accordance with local environ- mental regulations and not put with domestic waste.
Only use AAA (LR3) size batteries.
Changing/Inserting batteries:
a)Open and remove the battery compartment lid of the remote control by tugging sharply on the fishpla- te on the edge of the remote control. The battery compartment lid is held in place magnetically, there is no need to loosen the screws!
a
b)If necessary, remove used batteries and insert new ones correctly as shown by the diagram in the battery compartment.
old | b | new |
|
|
c) Put the compartment cover back on and close the battery compartment.
c
Vincent 29
