If you don't wish to use this function or if the other components do not support it, all you have to do is leave out these cable connections.
The
(1) The complete system is to be switched on/off at the
In this situation the input in the terminal "POWER CONTROL" (15) must not be occupied and must be left open. Two HiFi components that are able to react to the power control signal can be connected directly to the amplifier's power control outputs. If more than two devices, which can be controlled, are to be con- nected, then it is necessary, to make the power control connection between the preamplifier and these furt- her devices through the outputs of the two devices which are connected directly. For that reason, every HiFi component that accepts power control signals is also equipped with a power control output. Thus, in theory it is possible to provide an infinite number of HiFi components with the power control signal. This approach, to loop a signal through a chain of components, is commonly referred to as "daisy chaining".
e.g. main amplifier
(2) The
If, for example, two output channels of a preamplifier are connected to the main input "LINE5", if this HiFi component can supply a power control signal and if you want the amplifier
e.g. AV preamplifier
