Vincent Audio SV-234 Search For Errors, Possible Cause, Countermeasure, Vincent, Symptom

SEARCH FOR ERRORS

Symptom	Possible Cause	Countermeasure
Unit does not work	Mains cable is not connected to a suitable	Connect to a functioning socket using a
after pressing the	mains wall outlet.	suitable mains voltage.
power button	Mains cable has not been firmly inserted into	Check the power cable. If necessary,
	wall power socket and the device’s socket.	exchange it with a suitable mains cable
	Otherwise it may be defective.	and push its plug firmly into wall socket and
		the device's power connector.
	Unit fuse or unit is defective.	Contact your dealer.
No sound on both	The currently selected audio source	Switch on the source unit and begin playback.
channels although	(10)(11)(12) is giving no signal.
the unit is ready for	The output of the source device is not connec-	Correct the connection.
use (front panel	ted or is wrongly connected e.g. not connected
display is functional)	to the selected input channel terminal of
	the amplifier.
	Wrong input channel has been selected at	Set the amplifier to the input that your
	the amplifier.	desired source is connected to (10)(11)(12).
	Volume (LEVEL) is set too low.	Carefully increase the volume (3)(19).
	The amplifier is muted (MUTE-Function).	Deactivate the MUTE function (17) after, as
		a precaution, reducing the volume level.
	The output of the speaker pair you want to	After, as a precaution, reducing the volume
	use has not been activated.	level, press the "SPEAKER A/B" button (1)
		associated to the speaker output used, so that
		the LED next to the key is illuminated.
	The speaker cable is not properly connected	Check and tighten the speaker cables at the
	to the amplifier's terminal. Otherwise it may	amplifier and the speakers.
	be defective.
No audio playback	The source equipment is giving signal on	Check the audio source. You can try to use it
on one channel	only one channel.	at a different amplifier for a test.
	One of the signal cables between audio source	Check the cable connections, tighten them
	and amplifier inputs has not yet been plugged	if necessary.
	in or is defective.
	Channel balance has been set to the extreme	Set the channel balance to a reasonable value.
	right or left.
	One of the speaker cables is not correctly	Check and refasten the speaker cables at the
	connected or is defective.	speaker terminal of the amplifier and at the
		speaker’s connectors. The cables coming
		from both the speakers of a speaker pair must
		not be connected to different terminal sets (e.g.
		one A and one B) on the back of the amplifier.

Vincent 41