BUTTONS OF THE REMOTE CONTROL
17. MUTE
Pressing this button once mutes the sound of the loudspeakers (9), the preamplifier output "PRE OUT- PUT" (14) and the recording output "REC OUTPUT"
(13). Pressing it again returns to the original volu- | 17 |
| |
me. The Mute function is not available if the input |
|
"LINE5 MAIN INPUT" (11) has been selected for |
|
playback. |
|
18. Input Selector Buttons |
|
These buttons are used to select one of the stereo | 18 |
audio devices connected to the amplifier’s source |
|
inputs for playback. |
|
19. LEVEL and LEVEL : Volume keys |
|
These buttons change the amplifier’s volume setting |
|
for loudspeakers and the preamplifier output "PRE |
|
OUTPUT" (14). This volume setting can not be made |
|
if the input "LINE5 MAIN INPUT" (11) has been | 19 |
selected for playback. |
|
20. GAIN: Push button for
With the activation of this function, the output signal for the power amplifier (14) and speakers (9) is redu- ced by 8 dB and thus the volume of the attached speakers. It should only be activated if even at low volume settings the volume is already very high.
21. BAL L and BAL R
Both keys can be used for changing the volume dif- ference between right and left speaker if that is desi- red. That is not possible for the source device con- nected to "LINE5 MAIN INPUT".
20
21
