APPENDIX
Troubleshooting Guide
Symptom | Possible causes |
| Solutions / Corrective Actions | |
The camera does not | * The batteries are depleted. | * Load new or fully charged batteries. | ||
power on. | * The batteries are not oriented correctly. | * Ensure that the battery polarity is correct. | ||
| * The battery cover is not closed properly. | * Close the battery cover correctly. | ||
| * The AC power adapter (optional) is disconnected. | * Properly connect the AC power adapter. | ||
The ViviCam 8400 | * The function of Auto Shut Down in | * Set the option of Auto Shut Down to Off. | ||
(Setup) mode has been activated. | * Press the power button again or | |||
suddenly powers down. | ||||
* The batteries are depleted. | replace the batteries with a new or | |||
| ||||
|
|
| freshly charged set. | |
|
|
|
| |
The image is not | * The ViviCam 8400 is in | (Play) mode. | * Rotate the mode dial to A , P , SCENE | |
captured when the | * Memory is full. |
| , Tv , Av or M. | |
shutter button is |
|
| * Transfer the desired files to your | |
pressed. |
|
| computer and then delete unnecessary | |
|
| files, or use a different memory card. | ||
|
|
| ||
|
|
| ||
The flash does not fire. | * NO FLASH is selected in flash mode. | * Select a different flash mode. | ||
| * The ViviCam 8400 is in Burst/AEB/ | * Select [Single] in the capture mode . | ||
|
| |||
| (Video) mode. |
|
| |
Continuous shooting | * The capacity of the | * Insert a new SD memory card. | ||
is not possible. | SD memory card is full. |
|
| |
Cannot transfer files | * The USB cable is not connected securely. | * Check all connections. | ||
over a USB connection. | * The USB driver is not installed. | * Install the USB driver on your computer. | ||
| * The ViviCam 8400 is turned off. | |||
| * Turn on the ViviCam 8400. | |||
|
|
| ||
