You can choose one of these flash options:

Auto

 

When recording in a dark place and backlit conditions, the

 

 

camera will automatically determine whether the flash

 

 

is necessary

Red-eye Reduction

 

Pre-flash is performed before the main flash to reduce the

 

 

red-eye; an effect caused by light reflected from the retina.

 

 

Used in low light conditions when photographing people

 

 

or animals. The pre-flashes contract the pupils of the

 

 

subject’s eyes.

 

 

 

Fill-in

 

Used to soften dark shadows on the face of the subject due

 

 

to back light, strong direct light or sunlight. The flash will

 

 

always be used regardless of the surrounding brightness.

 

 

 

Off

 

Used when recording in a place where flash photography

 

 

is prohibited, or when utilizing the night view or indoor

 

 

lightning for recording. The flash will always be off during

 

 

recording.

 

 

 

To select a flash option, toggle the Flash button until you see its icon appear on the status LCD.

Using the Self-Timer ( )

If you need to take a group picture including yourself or a solo picture but no one is there to help you, use your camera's Self-Timer. The Self-Timer provides a 10-second delay between the time you press the Shutter button and the time the picture is taken, giving you just enough time to run in front of the camera to include yourself in the picture.

Self-Timer works in Capture mode

only. To enable the Self-Timer, turn the dial knob to one

of these three modes:(

), then do the following:

1.Press the LCD button to turn on the LCD monitor.

2.Press Menu button to display the menu screen on LCD monitor.

3.Press

or

button repeatedly until the Camera Menu

screen appears.

 

 

 

 

 

 

 

 

 

 

 

4.Press

button to select the SELF-TIMERoption.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.Press

or

button to turn ON the Self-Timer.

 

 

 

 

 

 

 

 

6. Press Menu button to exit from menu screen.

7.Press the shutter button. A red LED will then flash for 10 seconds and beep at the final three seconds. Afterwards, the camera will beep once, indicating that the picture is taken.

Note:

The Self-Timer is automatically turned off after the picture is taken or if the camera is powered off.

25

Page 25
Image 25
Vivitar Vivicam 3735 user manual Using the Self-Timer