VIVOTEK

3-axis Mechanism Design

The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation for either ceiling or wall mount.

Pan 350°

Tilt Adjustment Screw

Rotate 350°

DO NOT over rotate the lens. Doing so will damage the camera lens module.

Completion

FD8133: Tilt 85°

FD8134: Tilt 70°

1.Align the inner side of the black cover with the notch on both sides of the lens, fix the black cover.

2.If you choose to the feed the cable through the ceiling/wall, arrange the cable neatly through the cable hole. If you choose to feed the cable from the side, remove plate B.

3.Attach the dome cover to the camera as the direction shown below. With idiot-proof mechanism design, the dome cover cannot be attached if the angle does not fit. You will hear a crisp sound when the dome cover is assembled successfully.

4.Finally, make sure all parts of the camera are securely installed.

2

1

Be aware of the cable route!

B

3

 

12 - User's Manual

Page 12
Image 12
Vivotek FD8133 user manual Completion, Axis Mechanism Design