VIVOTEK
Network Deployment
Setting up the Network Camera over the Internet
This section explains how to configure the Network Camera to an Internet connection.
1. | If you have external devices such as sensors and alarms, make the connection from the | ||
| general I/O terminal block. |
|
|
| + : Digital input |
| |
|
|
| |
|
|
| |
2. | Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch. | ||
Use a Category 5 Cross Cable when Network Camera is directly connected to PC.
3. Connect the power cable from the Network Camera to a power outlet.
Ethernet Switch
1 2
3
There are several ways to set up the Network Camera over the Internet. The first way is to set up the Network Camera behind a router. The second way is to utilize a static IP. The third way is to use PPPoE.
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below.
1.Connect your Network Camera behind a router, the Internet environment is illustrated below. Regarding how to obtain your IP address, please refer to Software Installation on page 11 for details.
User's Manual - 7
