VIVOTEK
Server Settings
Click Add Server on Event Settings page to open the Server Setting page. On this page, you can specify where the notification messages are sent when a trigger is activated. A total of 5 server settings can be configured.
Server name: Enter a name for the server setting.
Server Type
There are four choices of server types available: Email, FTP, HTTP, and Network storage. Select the item to display the detailed configuration options. You can configure either one or all of them.
Email: Select to send the media files via email when a trigger is activated.
■Sender email address: Enter the email address of the sender.
■Recipient email address: Enter the email address of the recipient.
■Server address: Enter the domain name or IP address of the email server.
■User name: Enter the user name of the email account if necessary.
■Password: Enter the password of the email account if necessary.
■Server port: The default mail server port is set to 25. You can also manually set another port.
If your SMTP server requires a secure connection (SSL), check This server requires a secure connection (SSL).
To verify if the email settings are correctly configured, click Test. The result will be shown in a
Click Save to enable the settings, then click Close to exit the page.
User's Manual - 75
