VIVOTEK
Physical Description
Light Sensor
Lens
MicroSD/SDHC
Card Slot
Reset Button 
Black Cover
IR LEDs (8 units, distance 10m)
(FD8134 only)
| General I/O Terminal Block |
| Ethernet 10/100 |
| RJ45 Plug |
Status LED | Power Cord Socket |
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below.
Pin | Name |
+ | Digital Input + |
- | Digital Input - |
MicroSD/SDHC Card Capacity
This network camera is compliant with MicroSD/SDHC 32GB and other preceding standard SD cards.
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after reset, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the Network Camera to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that all settings will be restored to factory default. Upon successful restore, the status LED will blink green and red during normal operation.
4 - User's Manual
