Vivotek FD8133 user manual Bit 9 = Reserved bit Invalidate lenspan

			VIVOTEK
nmotionprofile	<positive integer>	0/7	Number of motion profiles.
ptzenabled	<positive integer>	0/7	An 32-bit integer, each bit can be set
			separately as follows:
			Bit 0 => Support camera control function;
			0(not support), 1(support)
			Bit 1 => Built-in or external camera;
			0(external), 1(built-in)
			Bit 2 => Support pan operation, 0(not
			support), 1(support)
			Bit 3 => Support tilt operation; 0(not
			support), 1(support)
			Bit 4 => Support zoom operation;
			0(not support), 1(support)
			Bit 5 => Support focus operation;
			0(not support), 1(support)
			Bit 6 => Support iris operation;
			0(not support), 1(support)
			Bit 7 => External or built-in PT; 0(built-in),
			1(external)
			Bit 8 => Invalidate bit 1 ~ 7;
			0(bit 1 ~ 7 are valid),
			1(bit 1 ~ 7 are invalid)
			Bit 9 => Reserved bit; Invalidate lens_pan,
			Lens_tilt, lens_zoon, lens_focus, len_iris.
			0(fields are valid),
			1(fields are invalid)
eptz	<positive integer>	0/7	A 32-bit integer, each bit can be set
			separately as follows:
			Bit 0 => stream 1 supports ePTZ or not.
			Bit 1 => stream 2 supports ePTZ or not.
			The rest may be deduced by analogy
npreset	<positive integer>	0/7	Number of preset locations.
protocol_https	< boolean >	0/7	Indicate whether to support HTTP over SSL.
protocol_rtsp	< boolean >	0/7	Indicate whether to support RTSP.
protocol_sip	<boolean>	0/7	Indicate whether to support SIP.
protocol_maxconnecti	<positive integer>	0/7	The maximum allowed simultaneous
on			connections.
protocol_maxgenconn	<positive integer>	0/7	The maximum general streaming
ection			connections .

User's Manual - 125