VIVOTEK
106 - User's Manual
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
daylight_enable <boolean> 6/6 Enable automatic daylight saving time in time
zone.
daylight_dstactualm
ode
<boolean> 6/7 Check if current time is under daylight saving
time.
(Used internally)
daylight_auto_begin
time
string[19] 6/7 Display the current daylight saving start time.
(product dependent)
daylight_auto_endti
me
string[19] 6/7 Display the current daylight saving end time.
(product dependent)
daylight_manual_off
set
<integer> 6/6 Manually set daylight saving time with offset.
daylight_manual_be
gintime
string[19] 6/6 Manually set daylight saving time beginning.
daylight_manual_en
dtime
string[19] 6/6 Manually set daylight saving time end.
daylight_timezones string 6/6 List time zone index which support daylight
saving time.
updateinterval 0,
3600,
86400,
604800,
2592000
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between NTP
automatic update intervals.
restore 0,
<positive integer>
7/6 Restore the system parameters to default
values after <value> seconds.
reset 0,
<positive integer>
7/6 Restart the server after <value> seconds if
<value> is non-negative.
restoreexceptnet <Any value> 7/6 Restore the system parameters to default
values except (ipaddress, subnet, router, dns1,
dns2, pppoe).
This command can cooperate with other
“restoreexceptXYZ” commands. When
cooperating with others, the system parameters
will be restored to the default value except for a
union of the combined results.
restoreexceptdst <Any value> 7/6 Restore the system parameters to default
values except all daylight saving time settings.