VIVOTEK

You can click Preview to fine-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the settings and click Close to exit the page.

If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open the Sensor Settings Profile Settings page as shown below.

2010/03/23 13:44:17

Please follow the steps below to setup a profile:

1.Check Enable this profile.

2.Select the applied mode: Day mode, Night mode, or schedule mode. Please manually enter a range of time if you choose Schedule mode.

3.Configure Exposure settings in the second column. Please refer to the last page for detailed information.

4.Click Save to enable the setting and click Close to exit the page.

56 - User's Manual

Page 56
Image 56
Vivotek FD8133 user manual Check Enable this profile