10
BATTERY AND POWER MANAGEMENT
This section contains important information about the battery and power management features of your Graphire Bluetooth pen tablet. Be sure to review the following items:
See also working with the tablet for more information about tablet features.
INSTALLING THE BATTERY
Your wireless pen tablet uses a rechargeable
Before installing or working with Graphire Bluetooth, you must first install the rechargeable battery that came with your tablet.
To install the tablet battery:1.Turn the wireless tablet upside down and slide open the battery compartment door.
2.Align the notch on the battery cable plug with the cutout in the tablet connector, then press the plug into the connector as shown.
Important: Use only the correct battery provided by Wacom and be careful not to drop it on hard surfaces. The battery can be damaged internally when dropped, and should be replaced even if there is no obvious damage. This will help prevent any future damage that could occur to the tablet if the battery has been dropped, is installed in the tablet, and then later develops a short or leak while in the tablet.
Warnings:
Do not attempt to install the battery backwards or reverse the polarity. If you do so, you may damage the tablet, cause a fire, or personal injury may result.
NEVER attempt to use other battery types in your tablet. Doing so may damage the tablet, cause a fire, or personal injury may result.
See replacing the tablet battery for additional battery cautions and warnings.
3.Insert the battery into the battery compartment and close the compartment door. Move on to charging the battery.
10