27
CHANGING THE TABLET UNDERLAY
Some configurations of the tablet come with a printed underlay that can be seen through the transparent photo frame. You can replace the underlay with a favorite photo or design of your own by following these steps:
1.To remove the photo frame, slide the two photo frame locks located on each side of the tablet to the unlocked position (toward the top of the tablet). Then grasp
the upper edges of the photo |
| Photo frame lock |
| ||
frame with your finger tips and lift |
| (one on each side). |
the photo frame away from the |
|
|
tablet. |
|
|
2.Lift away the printed underlay and replace it with a new photo or design of your choosing.
3.To replace the photo frame, insert the tabs located on the lower edge of the cover into the slots on the tablet. Then lower the photo frame into place and slide the photo frame locks to the locked position (towards the bottom of the tablet). This will protect your photo or design as you work on the tablet.
To create a new tablet underlay, follow the tips in the next section.
CREATING A NEW TABLET UNDERLAY
If you would like to create an image that you can use for the tablet underlay, you can use the templates provided on the Wacom Pen Tablet Driver CD as a starting point:
1.Insert the Wacom Pen Tablet Driver CD into your computer and locate the TEMPLATES folder.
2.Open the folder to access the template files. Template files come in various formats that can be modified within any graphics application that supports .jpg or .psd formatted files.
3.Choose one of the
4.When you are done, print out your new tablet underlay. Use
5.Trim the new underlay to size and place it beneath the tablet photo frame. See above.
27