Wacom CTE-630BT CUSTOMIZING THE SIDE SWITCH

ContentsIndex

32

CUSTOMIZING THE SIDE SWITCH

Select the PEN tab to change the functions assigned to the side switch of your Graphire pen.

The DuoSwitch can be set to simulate a variety of mouse functions; the pull-down menus enable you to choose the function that will be performed.

Select the function to perform when pressing the upper or lower side switch.

When you bring the pen tip within 5 mm (0.20 inch) of the tablet surface without touching the tablet and press the upper or lower side switch, the selected function occurs.

Hint: To make double-clicking easier, set the side switch to double-click automatically by selecting DOUBLE CLICK.

Note: You can change the SIDE SWITCH MODE for the way you like to use the pen when making right-clicks or other click functions. Click on the ADVANCED button. In the dialog box that appears:

• Select HOVER CLICK to perform click functions without touching the pen tip to the tablet surface.

• When CLICK & TAP is selected, you must first press the pen button and then touch the pen tip to the tablet surface in order to perform a click function. CLICK & TAP enables the precise placement of your click functions.

ContentsIndex

32