Double-clicking is difficult.

Be sure you are quickly tapping the tablet twice in the same place on the tablet active area.

Using the side switch to double-click is recommended (review the techniques in clicking).

Set one of the tablet ExpressKeys to DOUBLE CLICK and use it to issue double-clicks.

See adjusting tip feel, eraser feel, and double-click:

•Try increasing the DOUBLE-CLICKDISTANCE.

•Try using a lighter TIP FEEL.

 

Windows: Try setting your system to launch programs with a single

 

click. See clicking.

 

 

The pen selects everything,

Open the Pen Tablet control panel and go to the PEN tab. Move the TIP

will not stop selecting.

FEEL slider toward FIRM. If this does not help, see testing your tablet.

 

 

The eraser selects everything

Open the Pen Tablet control panel and go to the PEN tab. Move the

or will not stop erasing.

ERASER FEEL slider toward FIRM. If this does not help, see testing your

 

tablet.

 

 

You notice a screen delay at

Try decreasing the DOUBLE-CLICKDISTANCE (see adjusting tip feel,

the beginning of pen strokes.

eraser feel, and double-click).

 

 

You have to press hard with

Open the Pen Tablet control panel and go to the Pen tab. Move the TIP

the pen when clicking or

FEEL slider toward SOFT.

drawing.

 

 

 

The pen tip does not function.

Be sure you are using the pen that originally came with your pen tablet.

 

Other pens may not function properly on the Graphire tablet.

 

Make sure the power indicator light changes from blue to green when

 

the pen tip is pressed to the tablet surface. If it does not, you may have

 

defective hardware (see testing your tablet).

 

The side switch does not work. Be sure you press the side switch when the pen tip is within 5 mm

 

(0.20 inch) of the tablet active area – do this without pressing down on

 

the pen tip.

 

In the Pen Tablet control panel, click on the PEN tab ADVANCED button.

 

If CLICK & TAP is selected, you will need to first press the pen button and

 

then touch the pen tip to the tablet surface in order to perform a click

 

function. See customizing the side switch.

 

From the Pen Tablet control panel, verify that the side switch is set to the

 

function you are expecting to occur.

 

Make sure the power indicator light changes from blue to green when

 

you press the side switch. If it does not, you may have defective

 

hardware (see testing your tablet).

 

 

The screen cursor jumps back.

Do not place the pen or cordless mouse on the tablet when they are not

 

in use, or when you are using another pointing device. Leaving your

 

tool on the tablet may interfere with screen cursor positioning when

 

using other input devices.

ContentsIndex

50