Contents

After switching on the tablet,

•

the power indicator light

 

remains on but the screen

•

cursor cannot be moved with

•

the pen or cordless mouse.

 

•

Index

49

Review using the cordless pen and using the cordless mouse to be sure you are using the input tools correctly.

Switch the tablet power off, then back on.

If your battery charge is low, plug in the power adapter.

Try resetting the tablet by simultaneously pressing both ExpressKeys and the power button for about five seconds.

Then turn off the tablet and switch it back on. Check the pen and mouse operation.

 

• Reset the tablet by disconnecting both the battery and the AC power

 

connector for at least 10 seconds. Then reconnect the tablet battery

 

and try again.

GENERAL PROBLEMS

 

The charging indicator does

Check that the power adapter is properly plugged into the tablet, and

not light when the power

that the AC power cord is plugged into the power adapter and an active

adapter is plugged in.

power outlet.

 

The battery may need replacement. See replacing the tablet battery.

 

 

While using the tablet, the

The battery is nearly empty. Plug in the power adapter to continue

tablet power indicator light

working, or power down the tablet.

flashes once per second.

 

The pen works only in MOUSE MODE, and does not draw with pressure-sensitivity.

The tablet driver software was not installed or did not load properly. Make sure the tablet driver software is installed and functioning. Insert the Wacom Pen Tablet Driver CD into your computer and install the driver software for the tablet.

The pen does not draw or ink with pressure sensitivity.

Some applications require that you turn on the pressure capabilities within the application or the selected tool before the pen will respond as a pressure-sensitive tool.

Clicking is difficult.

Try using a lighter Tip Feel (see adjusting tip feel, eraser feel, and

 

double-click).

 

Select the CLICK SOUND option so that you can hear when the pen

 

registers a mouse click. Your computer speakers must be turned on and

 

the volume audible before you can hear CLICK SOUND.

ContentsIndex

49