15
3.While the tablet is in discoverable mode, pair it to your computer. The following points provide a general overview of the pairing process. For detailed instructions on pairing a Bluetooth device to your computer, refer to the documentation that came with your operating system or Bluetooth support.
•Open the Bluetooth devices control panel. Some common access points to this control panel include: the task bar, menu bar, control panel, or system preferences pane of your computer’s operating system.
•From the Bluetooth devices control panel, start the process of adding a device. Common options to
do so are ADD A BLUETOOTH DEVICE, BLUETOOTH SETUP, or SET UP NEW DEVICES.
•In the setup assistant that appears, carefully follow all directions to continue.
•If prompted for the device type to set up, choose “mouse”.
•When the tablet is discovered it will show up as WACOM PEN TABLET. Select it and continue to follow the prompts. If the tablet does not appear, you will need to refresh the assistant and again press the tablet CONNECT button.
•If prompted for an authentication code or passkey, select the “don’t use” or “no” option. The Graphire Bluetooth pen tablet does not require passkey authentication.
•If prompted for the device type services to add, choose the option for “tablet”. Otherwise choose “mouse”.
•After the wireless tablet has been successfully paired to your computer it will appear as a connected device in the Bluetooth devices control panel.
4.Close the Bluetooth devices control panel and check the connection. Place the pen on the tablet – you should be able to move the screen cursor with the pen.
Once you have established a connection between your wireless tablet and the computer, they will remember the connection – just as if you had connected a virtual cable between them. The tablet will remember which computer it is connected to, and will reject all attempts by other computers to connect to it.
•If the link is broken for more than two seconds (e.g., you shut down your computer, unplug your
•When starting up your computer, wait until your operating system has completely loaded and then push the tablet power button. The Bluetooth connection will automatically be reestablished.
•If you again press the CONNECT button, the virtual cable link will be broken and the tablet will once again become discoverable by any Bluetooth enabled computer.
Important: Remember that the Graphire Bluetooth pen tablet driver software must be installed before you will be able to work with full tablet functionality and features such as
5.If you have not already done so, install the pen tablet driver software. Insert the Wacom Pen Tablet Driver CD into your computer’s
15