Manuals / Weider / Fitness & Sports / Home Gym

Weider 740 user manual Questions?, User’S Manual, Visit our website at, Customer Hot Line

Models: 740

1 27

Download 27 pages 9.31 Kb

Page 1

Image 1

Model No. WESY74091

Serial No.

The serial number is found in the location shown below. Write the serial number in the space above.

Serial

Number

Decal

QUESTIONS?

We are committed to providing complete customer satisfaction.

If you have questions, or if there are missing parts, we will guaran- tee complete satisfaction through direct assistance from our factory.

TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni- cians on our customer hot line will provide immediate assis- tance, free of charge to you.

CUSTOMER HOT LINE:

1-888-936-4266

Mon.–Fri., 8 a.m.–6:30 p.m. EST (excluding holidays)

CAUTION

Read all precautions and instruc- tions in this manual before using this equipment. Save this manu- al for future reference.

USER’S MANUAL

Visit our website at

www.weiderfitness.com

Page 1

Image 1

Weider user manual Questions?, User’S Manual, Visit our website at, Model No. WESY74091 Serial No, Customer Hot Line

Contents

USER’S MANUAL QUESTIONS?Visit our website at Model No. WESY74091 Serial NoLimited Warranty Table of ContentsICON OF/DU CANADA, 900 de l’Industrie, St-Jérôme, QC J7Y 4B8 6. Make sure the cables remain on the pulleys Important Precautions8. Keep hands and feet away from moving parts using the weight system Before You BeginAssembly Locate and open the parts bag labeled “FRAME ASSEMBLY.” Frame AssemblySee the inset drawing the Bolts with two 5/16” Nylon LocknutsDo not tighten Nylon Locknuts3 yet ASSEMBLY.” Arm Assembly7. Locate and open the parts bag labeled “ARM Make sure the welded tab on the Press Frametion of the welded bracket A on each Arm 12. Locate the parts bag labeled “CABLE ASSEMBLY Cable/Seat AssemblyShort Cable 58 is between the Pulley 15 and Nylon Jamnut 22. Make sure the Cable runs over the top of the Pulleyand the Spacer ing the following steps. Note Make sure the Pulley 21. Note Make sure the Cable Trap is oriented as shown Make sure the Cable Trap is oriented as shown27. Hook the closed loop on the end of the Long Cable SHOOTING AND MAINTENANCE on page Cable Diagramsbind the Cables. Incorrect cable routing can damage the weight system Short CableLong Cable Cable ID Chart76, 87 1/2” 58, 126 1/4”Changing the Weight Setting AdjustmentAdjusting the Arms for Butterfly or Press Exercises IMPORCable and re-install it Trouble-shooting and MaintenanceTightening the Cables Butterfly Weight Resistance ChartICON of Canada Inc Station1. The MODEL NUMBER of the product WESY74091 Ordering Replacement Parts2. The NAME of the product WEIDER Part No. 172750 R0101AWESY74091 R0101A REMOVE THIS PART IDENTIFICATION CHART FROM THE MANUAL1/4 Nylon Locknut 1/4 x 2 1/4 Carriage Bolt 5/16 Nylon Locknut Part Identification Chart-WESY740911/4 x 1 3/4 Screw 3/8 Nylon Jamnut 1/4 x 2 Screw 3/8 Nylon Locknut 5/16 x 1 1/2 Bolt 3/8 Plain Nut 5/16 x 2 Bolt 1/4 Flat Washer3/8 x 1 3/4 Bolt 3/8 x 2 Bolt #8 x 1” Screw 1/4 x 3/4 Screw 3/8 x 1 Bolt Cable Clip1/2 x 1/4 Spacer 1/2 x 3/4 Spacer 1/2 x 1 Spacer 1/2 x 1 3/8 Spacer 3/8 x 2 1/2 Bolt 1 Retaining Ring 3/8 x 2 3/4 Bolt 3/8 x 3 Bolt1 1/2 Square Inner Cap 1 Square Inner Cap 1 Round Inner Cap 1 Round Cover Cap 3/4 Round Inner Cap 3/8 Eyebolt1 3/4 Square Inner Cap 1 1/2 Square Outer Cap REMOVE THIS PART LIST/EXPLODED DRAWING FROM THE MANUAL R0101A Part List-Model No. WESY74091Description R0101A Exploded Drawing-Model No. WESY74091