Weider 740 guide

1" Round Inner Cap (49)

1" Round Cover Cap (70)

3/4" Round Inner Cap (34)

3/8" Eyebolt (35)

1 1/2" Square Inner Cap (32)

1" Square Inner Cap (65)

1 3/4" Square Inner Cap (77)

1 1/2" Square Outer Cap (27)

Image 24

Weider 740 user manual

Contents

Model No. WESY74091 Serial No Serial Number Decal Table of Contents Limited Warranty Important Precautions Make sure the cables remain on the pulleysKeep hands and feet away from moving parts Using the weight system Before You Begin Assembly To make the assembly process as smooth as possiTo complete the process over a couple of evenings Locate and open the parts bag labeled Frame Assembly See the inset drawingBolts with two 5/16 Nylon Locknuts Tighten the Nylon Locknuts yet Place the Top Frame 55 on top of the Upright Do not tighten Nylon Locknuts3 yetSlot Frame Top Frame Weight Guide Tube Top FrameLocate and open the parts bag labeled ARM Make sure the welded tab on the Press Frame Tion of the welded bracket a on each Arm Locate the parts bag labeled Cable Assembly Short Cable 58 is between the Pulley 15Bolt 12 and a 3/8 Nylon Locknut Cable Trap is oriented as shown Spacer 8 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/815b Onto the Bolt to prevent the Pulley from falling off dur Ing the following steps. Note Make sure the PulleyView from behind From Pulley To Pulley Bracket Bolt 12 and a 3/8 Nylon Locknut 21. Note Make sure the Cable Trap is oriented as shownSpacer To the Seat 13 with two 1/4 x 3/4 Screws Cable Diagrams Shooting and Maintenance on Long Cable 76, 87 1/258, 126 1/4 Adjustment Cise will be reduced Changing the Weight SettingAdjusting the Arms for Butterfly or Press Exercises Attaching the Lat Bar to the Pulley Station Trouble-shooting and Maintenance Cable and re-install it Weight Resistance Chart Station LeverTop Ordering Replacement Parts Part No R0101A Remove this Part Identification Chart from the Manual WESY74091 R0101A Part Identification Chart-WESY74091 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual Part List-Model No. WESY74091 Qty Description16 x 2 1/4 Bolt Backrest Nylon Locknut Exploded Drawing-Model No. WESY74091 R0101A