15.Refer to drawing 15a. Remove the 5/16” x 6” Bolt (7), the two 1/2” x 1” Spacers (51), the 1/2” x 1 3/8” Spacer (61), and the 5/16” Nylon Locknut (3) from the Weight Guides (62) and the Top Frame (55).
Refer to drawing 15b. Route the Short Cable (58) up through the indicated slot in the Top Frame (55). Wrap the Short Cable around a 3 1/2” Pulley (15) in the direction shown and slide the Pulley into the slot in
the Top Frame from the back. Attach the Pulley inside
the slot with a 3/8” x 2” Bolt (12), two 1/2” x 1/4” Spacers (44), two 3/8” Flat Washers (9), and a 3/8” Nylon Jamnut (22).
Refer to drawing 15a.
(7), the two 1/2” x 1” Spacers (51), the 1/2” x 1 3/8”
Spacer (61), and the 5/16” Nylon Locknut (3). Make sure that the Short Cable is between the Pulley
and the Spacer.
Refer to drawing 15b. Press a 1 1/2” Square Inner
Cap (32) into the indicated end of the Top Frame (55).
16.Attach the loop at the end of the Short Cable (58) to
the Weight Tube (63) with a 5/16” x 1 1/2” Bolt (11) and a 5/16” Nylon Locknut (3).
17.Locate the Butterfly Cable (76). It is approximately 87 1/2“ long and it has a closed loop on both ends.
Attach one end of the Butterfly Cable (76) to the welded bracket on the back of the Right Arm (48) with
a 3/8” x 1” Bolt (59), a 3/8” Plain Nut (56) and a 3/8”
Nylon Jamnut (22). Note: Make sure the Plain Nut and the Jamnut are mounted in the order shown here. Do not overtighten the Nylon Locknut; it must be possible to pivot the Cable.
18.Wrap the Butterfly Cable (76) around a Large Pulley
(39)in the direction shown.
Attach the Large Pulley (39) and a Long Cable Trap
(50) to the welded bracket on the right side of the
Upright (42) with a 3/8” x 2 1/2” Bolt (60) and a 3/8”
Nylon Locknut (21). Note: Make sure the Cable Trap is oriented as shown.
15a |
| 15b |
| 44 |
| 61 |
|
| |
|
| 15 |
| |
| 3 |
|
| |
|
|
|
| |
| 51 |
| 44 | 22 |
7 |
|
|
| 9 |
|
|
|
| |
| 55 |
|
| |
|
| 32 |
|
|
| 62 |
| 9 | 55 |
|
| 12 |
| 58 |
16 | 3 |
| 58 |
|
|
|
|
| |
| 63 |
|
|
|
|
|
|
| 11 |
17 |
|
| 59 |
|
| Welded Bracket |
|
| |
|
|
|
| |
| 76 | 56 |
|
|
|
|
|
| |
|
| 22 | 48 |
|
|
|
|
| |
18 |
|
|
|
|
| Welded Bracket |
| 21 |
|
| 50 |
|
|
|
| 60 | 39 |
|
|
|
|
|
| |
|
|
| 42 |
|
|
| 76 |
|
|
11
