Before You Begin, Using the weight system | Weider 740 guide

Before You Begin

Thank you for selecting the versatile WEIDER		® 740	Department toll-free at 1-888-936-4266, Mon.–Fri., 8
weight system. The WEIDER	® 740 offers a selection of		a.m.–6:30 p.m. EST (excluding holidays). To help us
weight stations designed to develop every major mus-			assist you, please note the product model number and
cle group of the body. Whether your goal is to tone			serial number before calling. The model number is
your body, build dramatic muscle size and strength, or			WESY74091. The serial number can be found on a
improve your cardiovascular system, the WEIDER		®	decal attached to the weight system (see the front
		®
740 will help you to achieve the results you want.			cover of this manual).
For your benefit, read this manual carefully before			Please use the drawing below to familiarize your-
using the weight system.	If you have additional		self with the major parts of the weight system.

questions, please call our Customer Service

ASSEMBLED
DIMENSIONS:
Height:	75 in.	Pulley Station
Width:	31 in.	Pulley Station
Length:	44 in.
Upright
		Lat Bar
		Butterfly/Press
		Arm
		Backrest
		Foam Roller
Weight		Seat
Weight
Stack
		Leg Lever
		4

Image 4

Weider 740 user manual Before You Begin, Using the weight system

Contents

Model No. WESY74091 Serial No Serial Number Decal Table of Contents Limited Warranty Make sure the cables remain on the pulleys Important PrecautionsKeep hands and feet away from moving parts Using the weight system Before You Begin To make the assembly process as smooth as possi AssemblyTo complete the process over a couple of evenings Locate and open the parts bag labeled Frame Assembly See the inset drawingBolts with two 5/16 Nylon Locknuts Tighten the Nylon Locknuts yet Place the Top Frame 55 on top of the Upright Do not tighten Nylon Locknuts3 yetSlot Frame Top Frame Weight Guide Tube Top FrameLocate and open the parts bag labeled ARM Make sure the welded tab on the Press Frame Tion of the welded bracket a on each Arm Locate the parts bag labeled Cable Assembly Short Cable 58 is between the Pulley 15Bolt 12 and a 3/8 Nylon Locknut Cable Trap is oriented as shown 8 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/8 Spacer15b Onto the Bolt to prevent the Pulley from falling off dur Ing the following steps. Note Make sure the PulleyView from behind From Pulley To Pulley Bracket Make sure the Cable Trap is oriented as shown Bolt 12 and a 3/8 Nylon Locknut 21. NoteSpacer To the Seat 13 with two 1/4 x 3/4 Screws Cable Diagrams Shooting and Maintenance on 76, 87 1/2 Long Cable58, 126 1/4 Adjustment Cise will be reduced Changing the Weight SettingAdjusting the Arms for Butterfly or Press Exercises Attaching the Lat Bar to the Pulley Station Trouble-shooting and Maintenance Cable and re-install it Station Lever Weight Resistance ChartTop Ordering Replacement Parts Part No R0101A Remove this Part Identification Chart from the Manual WESY74091 R0101A Part Identification Chart-WESY74091 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual Qty Description Part List-Model No. WESY7409116 x 2 1/4 Bolt Backrest Nylon Locknut Exploded Drawing-Model No. WESY74091 R0101A