Weider 740 user manual Make sure the Cable Trap is oriented as shown

23.Wrap the Long Cable (23) around a 3 1/2” Pulley (15) in the direction shown.

Attach the 3 1/2” Pulley (15) and a Cable Trap (66) to the to the lower hole in the “I”-Plates (20) with a 3/8”

x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Note:

Make sure the Cable Trap is oriented as shown.

24.Wrap the Long Cable (23) around a 3 1/2” Pulley (15) in the direction shown.

Attach the 3 1/2” Pulley (15) and a Cable Trap (66) to the indicated hole in the welded bracket on the Base

(4)with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut

(21).Note: Make sure the Cable Trap is oriented as shown.

25.Wrap the Long Cable (23) around a 3 1/2” Pulley (15) in the direction shown.

Attach the 3 1/2” Pulley (15) to the indicated side of

the Pulley Bracket (57) by using the 3/8” x 2 1/2” Bolt (60) and the 3/8” Nylon Jamnut (22) attached in step

21.Note: Make sure the Pulley Bracket is oriented exactly as shown and that the Pulley is attached on the indicated side.

26.Wrap the Long Cable (23) around a 3 1/2” Pulley (15) in the direction shown.

Attach the 3 1/2” Pulley (15) to the indicated side of

the Upright (42) with a 3/8” x 3” Bolt (72), a 3/8” Flat

Washer (9) and a 3/8” Nylon Jamnut (22).Note:

Make sure the Long Cable is between the Pulley and the Spacer on the Upright/Base.

23
	20
		21
	15
12		66
	23
24
		21
	4
		15
12	66	23
25		57
60
15		23
22
26
		42
		22
23		9
15
		Spacer
72

13