Weider WESY19610 user manual Tighten the four 5/16” Nylon Locknuts 3 used in this step

11.Press a 1 3/4” Square Inner Cap (44) into the Seat Frame (36). Attach a Bumper (73) to the Seat Frame with a #8 x 3/4” Tap Screw (65).

Slide the Seat Frame (36) onto the 5/16” x 2 1/2” Carriage Bolts (1) in the Base (4). See the inset drawing. The indicated bracket on the Seat Frame must be behind the Press Frame (17).

Hand tighten a 5/16” Nylon Locknut (3) onto each Carriage Bolt. Do not tighten the Nylon Locknuts yet.

Attach the Seat Frame (36) to the Front Upright

(42)with two 5/16” x 2 3/4” Bolts (11), two 5/16” Washers (8), and two 5/16” Nylon Locknuts (3).

Tighten the four 5/16” Nylon Locknuts (3) used in this step.

12.Attach a Bumper (73) to the Rocker Arm (32) with a #8 x 3/4” Tap Screw (65).

Lubricate a 3/8” x 3 1/4” Bolt (68). Attach the Rocker Arm (32) to the Base (4) with the Bolt and a 3/8” Nylon Locknut (21). Do not overtighten the

Nylon Locknut; the Rocker Arm must be able to pivot freely.

13.Press a 1 3/4” Square Inner Cap (44) into each end of the Leg Lever (29).

Lubricate a 3/8” x 2 1/2” Bolt (7). Attach the Leg Lever (29) to the Rocker Arm (32) with the Bolt and a 3/8” Nylon Jamnut (33). Do not overtighten the

Nylon Jamnut; the Leg Lever must be able to pivot freely.

9

11
	Bracket		36
	17
42
8
		44
11
8			73 65
3	36
17		3	3
4
1
12
	73
	65
32
		68
21		Lubricate
4
13	44		7
32			Lubricate
	33
			29
	44